Trigger
Control
Tap to set a value
Sets one value when you press its button, or on a timer. Momentary holds the value while you press and lets go when you release. Latching sets it with one press and lets go with the next. Timed presses its own button: Start after says how long after the graph starts playing, Hold for how long it holds the value, and Repeat every how long from one press to the next; 0 presses once. Draw a control cable from its diamond to the diamond of the value you want to set.
Settings
- Bypass
Stops the button setting its value, which goes back to what you set.
- Values
- On or off
- Default
- Off
- Mode
Momentary sets the value while you hold the button. Latching sets it with one press and lets go with the next. Timed presses its own button at the times you set below, and still holds the value while you press it.
- Choices
- Momentary, Latching or Timed
- Default
- Momentary
Change
- Sets to
What the button sets the value to.
- Value
- In the terms of the value its Control cable moves
- Default
- The highest that value can be
Timing
- Start after
In Timed mode, how long after the graph starts playing the first press comes, in seconds.
- Range
- 0 s to 60 s
- Step
- 0.01 s
- Default
- 0 s
- Hold for
In Timed mode, how long each press holds the value, in seconds. 0 holds nothing; as long as Repeat every or longer holds without a break.
- Range
- 0 s to 60 s
- Step
- 0.01 s
- Default
- 1 s
- Repeat every
In Timed mode, how long from one press to the next, in seconds. 0 presses once.
- Range
- 0 s to 60 s
- Step
- 0.01 s
- Default
- 0 s
Connections
- Control
It moves one value on another node, through a control cable from this diamond.