EQ
Effects
Shape the tone.
EQ is one filter band. Choose its type, then the frequency it works at, how wide it is and how much it boosts or cuts. Each type uses the values it needs: a low pass uses only the frequency, and a parametric band all three.
Settings
- Bypass
Lets the sound through unchanged.
- Values
- On or off
- Default
- Off
A control node can move it.
- Type
The shape of the filter.
- Choices
- Parametric, Low pass, High pass, Resonant low pass, Resonant high pass, Band pass, Band stop, Low shelf, High shelf, Resonant low shelf or Resonant high shelf
- Default
- Parametric
A control node can move it.
- Frequency
Where the filter works: its centre, or where it starts to cut.
- Range
- 20 Hz to 44.1 kHz, or half the sample rate, if that is lower
- Step
- 20 Hz
- Default
- 20 Hz
A control node can move it.
- Bandwidth
How wide the filter is, in octaves.
- Range
- 0.05 octaves to 5 octaves
- Step
- 0.1 octaves
- Default
- 0.05 octaves
A control node can move it.
- Gain
How much the filter boosts or cuts.
- Range
- -96 dB to 24 dB
- Step
- 1 dB
- Default
- 0 dB
A control node can move it.
Connections
- Input
Sound comes in here, from one cable.
- Output
Sound goes out here, to any number of inputs.